EXFO SPSB-B-150-88-91 Singlemode-Startkabel für Tests
EXFO SPSB-B-150-88-91 Singlemode Launch Test Cable
Angebot anfragen
EXFO SPSB-B-150-88-91 ist ein 150m Singlemode-Testkabel mit SC/APC- und SC/UPC-Anschlüssen zur OTDR-Faserprüfung und -Charakterisierung.
Produktdetails
| Modell | SPSB-B-150-88-91 |
| Hersteller | EXFO |
| Kategorie | Netzwerk- und Faseroptik-Prüftechnik |
| Verfügbarkeit | Auf Anfrage |
Beschreibung
Überblick
Das EXFO SPSB-B-150-88-91 ist ein tragbares Startkabel zur Verwendung mit optischen Zeitbereichs-Reflektometern (OTDRs) für genaue Fasercharakterisierung und Netzwerk-Inbetriebnahme. Dieses 150m lange Singlemode-Kabel überbrückt die OTDR-Totzone und ermöglicht präzise Verlustvermessungen an Faserverbindungen, die sonst nicht messbar wären.
Hauptmerkmale
- 150m Singlemode-Faser (9/125 µm)
- SC/APC- (88) und SC/UPC- (91) Anschlüsse
- Verbindungseinführungsdämpfung unter 0.5 dB
- Verbindungsreflexion unter −60 dB (APC) und unter −50 dB (UPC)
- Tragbare weiche Tragetasche
- Ermöglicht Verlustvermessungen bei ersten und letzten Faserverbindungen
- Reduziert OTDR-Verbindungs-Kopplungen zur Verlängerung der Ausrüstungslebensdauer
- Gemischte Anschlusstypen unterstützen flexible Installationsszenarien
Anwendungen
- OTDR-Fasercharakterisierung und Netzwerk-Inbetriebnahme
- Installation und Fehlerbehebung von Faserverbindungen
- Verlustvermessungen an kritischen Faserverbindungen
- Qualitätssicherungsprüfung von Fasernetzen und Faserverbindungen
Technische Daten
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
| 91 | SC/UPC |
Angebot anfragen
EXFO SPSB-B-150-88-91 Singlemode-Startkabel für Tests
Antwort innerhalb von 24 Stunden
Unverbindlich
Direkter Kontakt